8.4.16

Burroughs' Encyclopaedia. Staining and Polishing Mahogany.

Burroughs' Encyclopaedia of Astounding Facts and Useful Information
Barkham Burroughs
1889
Your best plan will be to scrape off all the old polish, and well glass paper; then oil with linseed oil both old and new parts. To stain the new pieces, get half an ounce of bichromate of potash, and pour a pint of boiling water over it; when cold bottle it. This, used with care, will stain the  new or light parts as dark as you please, if done as follows:--wipe off the oil clean, and apply the solution with a piece of rag, held firmly in the hand, and just moistened with the stain. Great care is required to prevent the stain running over the old part, for any place touched with it will show the mark through the polish when finished. You can vary the color by giving two or more coats if required. Then repolish your job altogether in the usual way. Should you wish to brighten up the old  mahogany, use polish dyed with Bismarck brown as follows:--Get three pennyworth of Bismarck brown, and put it into a bottle with enough naphtha or methylated spirits to dissolve it. Pour a few drops of this into your polish, and you will find that it gives a nice rich red color to the work, but don't dye the polish too much, just tint it.


Ei kommentteja :